Here you can order custom laser etched 19mm push buttons. You can put text or a logo/symbol in the middle only. Would you have any special instruction or request, you will be able to enter them separate. If we have any question we will get in touch with you before doing any etching. These buttons comes with a pigtail connector for easy wiring and feature a replaceable micro switch. They have a flat surface and the led move with the button so they are easy to press in. What’s more? They are available with RGB LED for endless possibility!
Custom text;
The 19mm button only have a 13mm middle surface area to engrave. Text is limited to 8-10 character per line and a maximum of 2 line. We do all of our etching in capital letter but if you have any special request we will do them. Due to their design we can’t add text on the outer part of this button; if you are looking to get custom engraved outer text on your buttons we suggest that you have a look at the 22mm or 25mm models.
Custom Graphic;
We will gladly etch your custom logo but you need to provide us with a black and white image as we can’t process and trace colored image. The button will be etched where your graphic is black unless otherwise stated. We can work with most format; JPG, PNG, SVG, DXF, PLT. Make sure you have legal rights and permission to use the file you upload to us and that it is not under any copyright. If you want a logo or text we offer on another button size, just send us the product link in the “Special Instruction” field.
LED;
These buttons comes with 5 different LED color choice. The LED have independant pin on the button; they can be wired to light with your parking light, when you press the button or just about any configuration you can think of. If you are unsure about which pin does what, take a look at the wiring diagram page.
These model also comes in RGB; if you want a red, a blue or a green button you will be getting an RGB LED button. You will have the choice of these 3 color down the road. The RGB LED share a common anode which mean they are inter-connected to a positive (+12vdc) pin and you must connect to ground the color you want to light. More informations on the RGB LED can be found on the wiring diagram page. Each LED color pin is clearly identified on the buttons.
Specifications;
- 19mm (3/4″) Hole
- 22mm Face Diameter – 13mm Button Diameter
- 16mm Push Diameter
- IP67 Rating
- Pigtail Connector with 150mm (6″ long) wire
- 12VDC LED (White and Orange not polarity sensitive, RGB Common Anode)
- 5A Current Rating
- 10mm (3/8″) Maximum Panel Thickness
- 50mm (2″) Depth Including Pigtail
- Black Housing Material; Anodized Aluminum
- Chrome Housing Material; Stainless-Steel
| Weight | 0.1 lbs |
|---|
24 reviews for 19mm Custom Laser Etched Buttons
| 5 star | 83% | |
| 4 star | 12% | |
| 3 star | 0% | |
| 2 star | 4% | |
| 1 star | 0% |
You must be logged in to post a review.
Related products
19mm Billet Buttons
19mm Billet Buttons
19mm Billet Buttons
19mm Billet Buttons
19mm Billet Buttons
19mm Billet Buttons
19mm Billet Buttons
19mm Billet Buttons
Mark Kraus (verified owner) –
Anonymous (verified owner) –
Button was of greater quality than the ones purchased in the US, they must use a higher quality chinese button, etching was properly centered.
Donald T. (verified owner) –
Mark (verified owner) –
etching done well, looks good
Damon Frye (verified owner) –
Anonymous (verified owner) –
I ordered other engraved switches from other guys and I assumed yours are the same for the illumination of the engraved logo. I was kinda pissed that they are just engraved and the light doesn’t shine through the logo.
Not sure if you guys have the option to do that but now stuck with 10 switches that my customers don’t want.
Custom Billet Buttons (store manager) –
Hi! We are sorry that you don’t like our buttons. We do not advertise any Backlit buttons on our site, and the Gallery of previously done project reflect the work we do (and don’t). It is sad that you think we only deserve 2 star out of 5 though.
Anonymous (verified owner) –
Bruce S. (verified owner) –
Exactly as ordered. Etching was A++
Jacob G. (verified owner) –
Robert Crawford (verified owner) –
Steve Johns (verified owner) –
Sound Performance (verified owner) –
Anonymous (verified owner) –
Karl (verified owner) –
Jon (verified owner) –
Craig Davis (verified owner) –
J Reed (verified owner) –
Guy Livolsi (verified owner) –
Robert S. (verified owner) –
Did an super job on etching the face of the button. I have a 1967 VW Beetle with a high performance engine. The button turns on the fog lights but I had the words “WARP 9′ etched into the face of the button. Really nice!
Ryan A. (verified owner) –
Buttons all worked great and custom etchings look great. Only issue is one of the 8 buttons was the incorrect button type. 7 of the 8 buttons were RGB but the 8th was a white-only button
MICHAEL R. (verified owner) –
Tony S. (verified owner) –
Eric V. (verified owner) –
I did not opt for any customization for my order. The button is of outstanding quality. Very impressed.
Phillip Wallace (verified owner) –